Tuesday, December 11, 2012

Atari 2600 F8 bankswitching cartridge

 



This board implements the F8 bank switching method to be used with 8K A2600 ROM files.
An extra two 2-positions dip-switch is used to select a 8K portion of the 32K Eprom.
This board is based on the F8 bankcswitching design: http://www94.pair.com/jsoper/bankswitch_f8.html

Files
A2600-ROM.sch : Schematics (Eagle 5.0.0)
A2600-ROM.brd : PCB (Eagle 5.0.0)

Usage
Just 'flash' four 8ko files to the UVProm and plug-in the cartridge into the console.

JP1 :    

  •   1-2 : ROM is Bank-swiched for 8K ROM (F8 method)
  •   2-3 : ROM is not bank-switched. A12 is grounded to GND

S1 :     1 & 2 : Used to select a 8K portion of a 32K ROM (4 slots)

 

The attached package contains all you need to build your own cartridge.
Enjoy !

Buzz

Package 


 

- No comments:

Colecovision single ROM Cartridge

This board is made to be used with one ColecoVision ROM file (up to 16Ko).
For the moment, only one file can be stored to the EProm (no bank switching or bank selection).
 

The attached package contains the schematics and PCB file (Eagle 5.0).

Usage
Just 'flash' one 2Ko, 4Ko, 8K or 16Ko files to the UVProm and plug-in the cartridge into the console.


Enjoy !

Buzz

 Package

- No comments:
Subscribe to: Posts (Atom)

Expansion shield for Arduino UNO

  Expansion shield for Arduino UNO Version : 14/04/2023 This little board and the source code are part of a CS Bomb-like project to be us...

  • Colecovision ROM Builder
    Version : 07/03/2023 Updated : 07/04/2023 Coleco ROM Builder is a Windows application to easily build ROM files for the 31-in-1 & 63...
  • Arduino thermostat
      Here is an "easy to make" Thermostat. The goal was to replace an existing non working thermostat on a heat accumulation panel....
  • Colecovision 63-in-1
    Original version: 28/01/2013 Update: 12/02/2023 The 63-in-1 is a multicart board for the ColecoVision. It is made to handle 63 rom file...